Call us 9:00am - 6:00pm
953-700-0873
E-mail us
info@mechanismengineering.com
TURBO SEPARATOR
Principle :
The equipment consists of a conical shaped body fabricated from MS plate and internally cladded with SS 304 one operating door. The door is provided with one light rejects. A tangential inlet nozzle is given on the main body for the pulp inflow. In accept chamber is attached to the main body for the collection of accepted pulp. This chamber is provided with a nozzle at the top for getting the accepted pulp and another nozzle at the bottom for cleaning purpose. In between the accepted chamber and main body a screen made from SS 304 material is provided. The overall functioning of the equipment is done by a SS 410 / CA 40 casted rotor. The accept is collected in the accept chamber whereas the light rejects are taken in the secondary screen for fibre recovery. The shaft is mounted on 2 bearings in a CI bearing housing. A stuffing box arrangement having GM bushes and gland is provided for the proper guiding and sealing of the shaft. The equipment is driven by an electric motor through flat belt pulley.
Features :
- Operating consistency at 2-3%
- Light and heavy impurities are separated and efficiently removed.
- Due to high deflaking action the screen is ideally suited to kraft and other type of furnish.
- Easy maintenance and minimum fiber loss.
- The body is made out of M.S. with S.S. Cladding, Special model is also available in S.S. 316 sandwich plate (S.S. and M.S.) with base frame and stifners in M.S.
Technical Specifications :
- Mostly used to process kraft/writing, printing and duplex paper.
- Size available T-300/400/500/600/800.
- Operating Consistency 1.5% to 3%.
- Inlet required pressure 3 – 3.5 kg/cm2.
- Screen size 1.8mm to 2.8mm perforation.
